Table of Contents
Advertisement
Connecting the AV controller—Continued
Connecting a CD Player or Turntable
■ CD Player or Turntable (MM) with Built-in Phono Preamp
Step 1:
Choose a connection that matches your CD player ( ,
phono preamp.
• With connection
, you can listen to and record audio from your CD player or listen in Zone 2 or Zone 3.
a
• To connect the CD player digitally, use connection
use
and
, or
and
a
b
a
Connection
a
DIGITAL COAXIAL IN 2 (VCR/DVR)
b
DIGITAL OPTICAL IN 3 (CD)
c
b
c
When you use
connection
, you
b
need to assign the
digital audio input
(see page 51).
■ Turntable (MM) with no Phono Preamp Built-in
The AV controller's PHONO IN is designed for use with a mov-
ing magnet (MM) type cartridge.
Use an analog audio cable to connect the AV controller's
PHONO IN L/R jacks to the audio output on your turntable.
Notes:
• If your turntable has a ground wire, connect it to the AV con-
troller's GND screw. With some turntables, connecting the
ground wire may produce an audible hum.
If this happens, disconnect it.
• If your turntable has a moving coil (MC) type cartridge,
you'll need a commercially available MC head amp or MC
transformer. Connect your turntable to the head amp or trans-
former, and connect that to the AV controller's PHONO IN
L/R jacks.
• You can also use a phono equalizer to connect a turntable
with an MC-type cartridge. See your phono equalizer's man-
ual for details.
a
.)
c
AV controller
CD IN L/R
COAXIAL
IN 2
(VCR/DVR)
OPTICAL
IN 3
a
(CD)
IN
L
R
CD
L
R
COAXIAL
OPTICAL
AUDIO
OUT
OUT
OUT
, or
). Use connection
b
c
a
or
. (To record or listen in Zone 2 or Zone 3 as well,
b
c
Signal flow
⇐
⇐
⇐
CD player
Turntable (MM) with no
phono preamp built-in
for a turntable with a built-in
CD or turntable
Analog audio L/R output
Digital coaxial output
Digital optical output
IN
L
L
R
R
AUDIO
CD
OUTPUT
a
Turntable (MM) with
built-in phono preamp
AUDIO
OUTPUT
L
R
39
Advertisement
Table of Contents
