Safety Instructions; General Safety Instructions - Sferalabs Iono Pi Max v2 3+ Lite User Manual

Safety instructions

General safety instructions

Protect the unit against moisture, dirt and any kind of damage during transport, storage
and operation. Do not operate the unit outside the specified technical data.
Never open the housing. If not otherwise specified, install in closed housing (e.g.
distribution cabinet). Earth the unit at the terminals provided, if existing, for this purpose.
Do not obstruct cooling of the unit. Keep out of the reach of children.
WARNING
Life threatening voltages are present within and around an open control cabinet.
When installing this product in a control cabinet or any other areas where dangerous
voltages are present, always switch off the power supply to the cabinet or equipment.
WARNING
Risk of fire if not installed and operated properly.
Follow all applicable electrical safety standards, guidelines, specifications and regulations
for installation, wiring and operations of this product.
The Raspberry Pi Compute Module board could generate a substantial amount of heat
when the software forces the CPU and/or GPU to operate at high load levels. Ensure that
the product is properly installed and ventilated to prevent overheat.
The Iono Pi Max internal power supply could generate a substantial amount oh heat,
particularly when subject to a significant amount of electrical load.
An internal fan significantly improves the airflow and heat dissipation. Depending on
external environment conditions, the fan could collect a significant amount of dust or other
impurities, that could prevent it from spinning or could reduce its effectiveness. Periodically
check that the fan is not blocked or partly obstructed.
NOTICE
The connection of expansion devices to this product may damage the product and other
connected systems, and may violate safety rules and regulations regarding radio
interference and electromagnetic compatibility.
Use only appropriate tools when installing this product. Using excessive force with tools
may damage the product, alter its characteristics or degrade its safety.
7 Iono Pi Max User Guide