Subscribe to Our Youtube Channel
Related Manuals for Classic Exhibits eco-systems ECO-104T
Summary of Contents for Classic Exhibits eco-systems ECO-104T
- Page 1 © 2022 Order #XXXXX ECO-104T Table Top Display Plan View SETUP INSTRUCTIONS If you would like to tell us about your experience with your setup instructions please email us at info@classicexhibits.com...
-
Page 2: General Setup Instructions
© 2022 Order #XXXXX General Information General Setup Instructions - Read entire setup instruction manual prior to WARNING unpacking parts and pieces. - The setup instructions are created specifically for this configuration. - Setup instructions are laid out sequentially in steps, including exploded views with detailed explanation for assembly. - Page 3 © 2022 Order #XXXXX TSP46 Frame Assembly Slide connector across seam of extrusions. Disassembly Tighten all knobs. Straight Connection 1) Loosen all knobs. When assembling frame, first attach all straight Straight Connector 2) Slide connectors off of one extrusion. connectors, then attach corner connectors.
- Page 4 © 2022 Order #XXXXX SEG Installation Graphic Removal Corner A Corner B Corner D Corner C Step 1 Step 2 Step 3 It is important to first insert To remove the graphic from Insert corner A. Turn edge of Repeat Step 1 for opposite Once all corners are inserted, graphic into each alternate the frame, locate the fabric...
- Page 5 © 2022 Order #XXXXX Case Packing Top View of Each Level Aero Frame 2 3 4 Lights 6 7 8 9 Graphics Header Setup Hardware Level 1 Level 2 Level 3 (Bottom level) Case 1 of 1...
- Page 6 © 2022 Order #XXXXX Backwall Assembly Item Qty. Description Steps: 8” x 22” Base Plate Refer to the TSP46 Frame Assembly general information page. 46”h S44 Vertical Extrusion 46”h S44 Vertical Extrusion w/ key holes 1) Attach Base Plates [1] to bottom of verticals [2,3], using bolts. 46”h TSP46 Vertical Extrusion 2) Assemble horizontals [6-7], [8-9] together using straight connectors, 46”h TSP46 Vertical Extrusion...
- Page 7 © 2022 Order #XXXXX Aero Frame Assembly When assembled Using Your Setup Instructions The Aero Setup Instructions are created specifically for your configuration. The instructions include an exploded view of the frame which is sequentially labeled. We encourage you to review the instructions before attempting to assemble your exhibit.
- Page 8 © 2022 Order #XXXXX Attachments Steps: Light Attachment Refer to the SEG Installation general information page. Attach lights to 1) Apply SEG graphic to front of frame assembly. Horizontal where 2) Connect Aero Frame to key holes on vertical [3]. desired and tighten in place.
Need help?
Do you have a question about the eco-systems ECO-104T and is the answer not in the manual?
Questions and answers