Setting The Date And Time; Setting The Desired Water Temperature; Pv Mode Deactivated; Pv Mode Activated - Dimplex Edel 200 WATER/3 Installation Manual

6.3 - Setting the date and time

• Press «Clock settings»
2 6 / 0 9 / 1 1
1 7 : 3 2
- - / 0 9 / 1 1
1 7 : 32
2 6 /- - / 1 1
1 7 : 3 2
2 6 / 0 9 /- -
1 7 : 3 2
m o nd a y
- - : 3 2
m o nd a y
1 7 : - -
Confi rm new settings
-
INSTALLER
Set the day
Set the month
Set the year
Set the hour
Set the minutes
DOMESTIC HOT WATER HEAT PUMP 200L & 270L
6.4 - Setting the desired water
temperature

6.4.1 - PV mode deactivated

The water temperature can be adjusted from 30°C to 65°C. Up to
60°C, the water is heated using only the heat pump. From 60
65°C, the electrical back-up takes over.
• Press
• Turn the dial to scroll through the menu options:
wat e r t emp .
• Press to return to the main menu.
• In order to get the best results from your heat pump, it is
recommended that you do not set the water temperature too high
unless necessary. The default temperature is set at 55°C.

6.4.2 - PV mode activated

When PV mode is activated, the water temperature can be set to
a higher level to favour operation during periods of photovoltaic
production.
• Press
• Turn the dial to scroll through the menu options:
wa te r t e mp .
T°C wa t er
50
°C
T°P V E CO
60
°C
T°P V mA X
65
°C
Confi rm
• Press to return to the main menu.
The settings are available according to the following reasoning:
≤
TEMP T° PV ECO
The heat pump heats the water in the
T°P V E CO
domestic hot water tank to a higher
60
°C temperature than the usual hot water
temperature (mode «PV ECO»)
The heat pump and the electrical back-up
T° PV mA X
heat the water in the domestic hot water
tank to a higher temperature than the PV
65
°C
ECO mode (mode «PV mAX»)
T °C wa ter
50
° C
Confi rm
Set the
temperature
Set the temperature
Set the temperature
Set the temperature
≤ ≤
T° PV MAX 65°C
-
MANUAL
o C to
19