Set-Up And Use; Control Panel; Setting The Language - Dimplex Edel 200 WATER/3 Installation Manual

Deterioration risk: it is imperative to fi ll
the tank with water before switching on
the appliance or connecting it to the electrical
supply.
• Leave the appliance unplugged.
• Open the hot water valve located at the highest point of the
installation.
• Open the cold water inlet located on the safety group.
• Fill the tank until water is coming out of the hot water vavle located
at the highest point of the installation.
• Close the hot water valve
Before turning on the appliance, verify that the entire circuit is
watertight.
The heat pump water heater operates primarily with the heat pump
as long as the temperature of the water from the underfl oor heating
return fl ow is between 18°C and 50°C. Once the temperature is lower
than 18°C or over 50°C, the water is no longer heated by the heat
pump, but by the electrical back-up.
The temperature of the domestic hot water provided by the heat
pump is adjustable to up to 60°C.
In the case of high domestic hot water consumption, the heat pump
water heater has a comfort function, t°C mini which increases the
heating capacity when there is less than 1/3 of the tank's volume
left at over 38°C (see § «t°c mini -minimum temperature-»). There is
also a setting to activate the electrical back-up if the heating time
is too long (see § «max time»).
If more domestic hot water is required from time to time, the heat
pump water heater has a « boost» function (activated by the user)
which ensures that the water heats to the desired temperature ( for
example: 50°C ) quickly with the help of the heat pump and electrical
back-up. This function is deactivated as soon as the required
temperature is reached (end of heating cycle).
From time to time, check that there are no alerts (in case of an alert,
please refer to § «Error message codes»).
18

6 - SET-UP AND USE

DOMESTIC HOT WATER HEAT PUMP 200L & 270L
-
INSTALLER

6.1 - Control panel

Symbols and their designation:
..... Compressor operating
........ Electrical back-up
operating
.... Domestic hot water
requested
.... Comfort mode in
progress
....... Eco mode in progress
....... Frost protection mode
in progress

6.2 - Setting the language

The language must be selected when the appliance is turned on for
the fi rst time. Turn the dial to the left and select «English». Confi rm
your choice by pressing on the dial. Access to the «LANGUage» menu
is always possible.
• Press .
• Turn the dial to scroll through menu options:
L A N G U A G E
• Press to return to the main menu.
...... Holiday mode in
progress
..... Keyboard locked
......... Regulation or display
of a parameter in
progress
.... Photovoltaic mode
activated
1 2 3...7.Date
L A N G U A G E
Confi rm
E N
Choose the language
-
MANUAL