00504
/ 00704
34
7.3.2 P02 Salinity Compensation
*
|n P-02, you can set up Salinity concentration value for compensation to get the better
measurement result.
*
Please refer to above description steps to set up P-02.
*
Range: 0.0-40.0mg/L.
e
You can go to next parameter setting by pressing A
, Or press
key to quit and go
back to measurement mode.
7.3.3 PO3 Temperature Offset
+
|n P-03, you can set up temperature offset value for better measurement result.
*
Please refer to above description steps to set up P-03.
e
Range: +10°C.
*
You can go to next parameter setting by pressing O) ©, Or press
key to quit and go
back to measurement mode,
Need help?
Do you have a question about the PH200 and is the answer not in the manual?