CLEAN Instruments PH200 Operation Manual page 28

6.3.6 P06 Auto Lock Function Setting
% Hd % Hd
% Hd
P-06 SY
CI *
I
* In P-06, you can set the Auto Lock Function.
e Please refer to above description steps to set up P-06.
e If the Auto Lock Function is ON, the meter can lock the measured value after the reading had
stabilized. Press to unlock.
* You can go to next parameter setting by pressing © OT press key to quit and go
back to measurement mode.
6.3.7 P07 Auto Power Off Setting
o
©
Te)
=
O
O
o
o
N
Z
O
Q
* |n P-07, you can set the Auto Power Off Function.
* Please refer to above description steps to set up P-07.
+ |f the Auto Power Off is ON, the meter will power off if no operation in 10mins.
* You can go to next parameter setting by pressing 9 , Or press key to quit and go
back to measurement mode.
25