Savings Tips; Set Up The Device And Connect; Scope Of Delivery - Siemens WT47W5W0 Manual

de

Savings tips

7th
Savings tips
Spin the laundry before drying. Drier
■
Save money
laundry shortens the program
duration and lowers energy
consumption.
Load the device with the maximum
■
load quantities of the programs.
A notice: Exceeding the maximum load
length extends the program duration and
increases energy consumption.
Operate the device in a ventilated
■
room and keep the air inlet of the
device free so that air can be
exchanged. Regularly remove the lint
in the appliance. A device soiled with
■
fluff will extend the program duration
and increase the
Power consumption.
If you do not operate the device for a
■
long time before the program starts or
after it has ended, the device
automatically switches to energy-
saving mode. The display and
indicator lights go out after a few
minutes andStart pause Ü flashes.
You can exit the energy-saving mode
by operating the device again, e.g.
opening and closing the door.
If you do not operate the device in
■
energy-saving mode for a long time,
the device switches off automatically.
12th
5
Set up the device and
connect

scope of delivery

Set up and connect the device
Accompanying documents (e.g.
instructions for use and installation)
1. Completely remove packaging material and
protective sleeves from the device.
2. Open door.
3. Take all accessories out of the drum.
You can now set up and connect the
device.
Caution!
Property and equipment damage
Objects left in the drum that are not
intended for use in the device can cause
property damage and damage to the
device. Remove these objects and all
accessories from the drum.