Table of Contents
Advertisement
6. Orient the Seat Frame (9) as shown.
Attach the Seat Frame (9) to the Seat Carriage
(7) with four M8 x 40mm Screws (28); start all
the Screws, and then tighten them.
7. Orient the Seat (10) as shown.
Attach the Seat (10) to the Seat Frame (9) with
four M6 x 40mm Screws (27) (only two Screws
are shown); start all the Screws, and then
tighten them.
6
28
9
7
7
10
8
28
9
27
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the 325 CSX and is the answer not in the manual?
Questions and answers
resistance to hard. Set at r1 but still too hard, Any way to reduce the resistance lower
To reduce the resistance on a Pro-Form 325 CSX exercise bike, adjust the resistance level using the console controls. If the resistance motor is not functioning correctly, check the power adapter connection and ensure it is fully plugged in. If further troubleshooting is needed, inspect the pulley and magnet alignment with the reed switch and adjust as necessary.
This answer is automatically generated