Table of Contents
Advertisement
Using the Timer
1.
Enter the Timer Mode.
Navigating Between Modes
l
Hour, minute
Seconds
2.
Use the operations below to perform a
timer operation.
D
Start
(Countdown starts)
D
Pause
D
Resume
(Time up)
A beeper will sound for 10 seconds to
●
let you know when the end of a
countdown is reached.
You can reset a paused countdown to
●
its start time, by pressing (A).
3.
Press any button to stop the tone.
Watch Operation Guide 5690
Hand Alignment
Strong magnetism or impact can cause the
time indicated by the analog hands to become
different from the time on the digital display. If
this happens, adjust hand alignment.
Using CASIO WATCHES to
Adjust Hand Alignment
If the watch is paired with a phone, you can
also use CASIO WATCHES to adjust hand
alignment.
Adjusting Hand Alignment
l
Adjusting Hand Alignment
1.
Enter the Timekeeping Mode.
Navigating Between Modes
l
2.
Hold down (A) for at least five seconds.
Release the button when [SUB] starts to
flash.
This enables adjustment of mode hand
alignment.
After 3.5 seconds
3.
If the mode hand is not pointing to [INFO],
use (B) and (D) to align it with [INFO].
Adjustment
After five seconds
Mode hand
4.
Press (C).
This enables adjustment of the hour and
minute hands.
Hour hand
Minute hand
5.
If the hour and minute hands are not at 12
o'clock, use (B) and (D) to align them.
6.
Press (A) to exit the setting screen.
Note
During hand alignment adjustment, the
●
watch automatically returns to the
Timekeeping Mode after two or three
minutes of non-operation.
21
Advertisement
Table of Contents
