Changing A Wheel - Renault Captur User Manual

CHANGING A WHEEL

5
4
3
3
2
Switch on the hazard warn-
ing lights.
Keep the vehicle away from
traffic and on a level surface
where it will not slip.
Apply the parking brake and engage
a gear (first or reverse, or P for auto-
matic transmissions).
Ask all the passengers to leave the
vehicle and keep them away from
traffic.
5.10
(1/2)
Vehicles equipped with a jack
and wheelbrace
If necessary, remove the wheel trim.
Use the wheelbrace 1 to slacken off the
wheel bolts. Position it so as to be able
1
to push from above.
Place the jack 2 horizontally; the jack
head must be lined up with the sill clos-
est to the wheel concerned, as shown
by an arrow 3.
If the vehicle is parked on
the hard shoulder, you must
warn other road users of
your vehicle's presence
with a warning triangle or with other
devices as per the legislation apply-
ing to the country you are in.
Start cranking the jack by hand, posi-
tioning the 4 jack support plate in the
slightly indented groove underneath
the vehicle, located between the two
notches 5 and in the direction of the
arrow 3.
Continue to crank the jack so that the
baseplate is correctly positioned (it
should be underneath the vehicle and
aligned with the jack head).
Turn it a few times to lift the wheel off
the ground.