Renault Captur User Manual page 283

AUTOMATIC GEARBOX, ELECTRONIC LEVER
One-touch selector
Move the selector lever 1 one or two
notches forwards or backwards to
engage the desired position (R, N or D)
then release the lever and it will return
to the stable position.
The selected position is displayed on
the instrument panel along with the 4
warning light in front of the position.
If certain conditions prevent shifting
from one position to another, the re-
quested position flashes on the instru-
ment panel.
1
To engage P position
With the vehicle at a standstill, engine
running or ignition on, press button 2 to
engage position P. The warning light on
the 2 button lights up in orange once
the Park position P on the gearbox is
engaged.
To disengage position P
With the vehicle stationary and the
engine running, press the brake pedal
and, move the 1 selector lever forwards
or backwards according to the posi-
tion desired. The 2 button warning light
switches off.
(2/6)
If the brake pedal is not fully depressed,
the message "Press Brake Pedal" and
the warning light
the instrument panel.
1
Note:
– if the driver opens their door to leave
the vehicle and position P has not
2
been engaged, a beep sounds and
the message "P not engaged" is dis-
played on the instrument panel;
– the warning light
each time the brake pedal must be
pressed to change the automatic
gearbox lever position.
To engage neutral
With the vehicle stopped and the
engine running, to select N position,
move the 1 selector lever one notch
forwards or backwards according to the
gear engaged.

are displayed on
 appears
2.153