Changing A Wheel - Renault TRIBER 2024 User Manual

CHANGING A WHEEL

Switch on the hazard
warning lights.Keep the
vehicle away from traffic
and on a level surface
where it will not slip (if necessary,
place a solid support under the
jack base).Apply the parking
brake and engage a gear (first or
reverse).
Ask all passengers to leave the
vehicle and keep them away from
traffic. If the vehicle is parked on
the hard shoulder, you must warn
other road users of your vehicle's
presence with a warning triangle.
Removing the Wheel
Use the wheel wrench to loosen the
wheel bolts by firmly holding the
wrench and applying force to unscrew.
Remove all the bolts A completely to
separate the wheel from the hub.
Place the jack under the body ,and
align it to the locating triangle
markings. It is forbidden to lift the car
by placing any jack under front control
arms, rear axle and subframe.
Crank the jack using wheel wrench
until the tyre raises up and sufficient.
Refitting the Carwheel
By aligning one of the hole in the
wheels to the hole in the wheel drum/
disc..
Keep the wheel cover (on select
variants) and wheel bolts handy, place
and hold the wheel cover to align with
the wheel holes.
Using the wrench, tighten the bolts
evenly. Uncrank (release) the jack
using wheel wrench till the jack
becomes free from holding the vehicle
anymore.
Now tighten the wheel bolts
completely.
Place the punctured or removed wheel
inside the spare wheel tray. Place the
tray inside the J-hook and tighten the
screw from the top.
Place the wheel wrench and jack in
pouch.
P r a c t i c a l a d v i c e - 1 3 7
6