AUTOMATIC GEARBOX, MANUAL LEVER
2
Selector lever 1
P: park
R: reverse
N: Neutral
D: automatic mode
The 4 display on the instrument panel
shows the position engaged by the se-
lector lever 1 or displays the gear en-
gaged in manual mode.
Note: press the 2 button to exit position
P or to shift from position D or N to po-
sition R or P.
2.158
1
Operation
With gear lever 1 in position P, start the
engine.
To move out of position P, you must de-
press the brake pedal before pressing
the unlocking button 2.
With your foot on the brake pedal
(warning light 3 on the display goes
out), move the lever out of position P.
Only engage D or R when the vehi-
cle is stopped, with your foot on the
brake and the accelerator pedal re-
leased.
(1/4)
Driving in automatic mode
Put lever 1 into position D.
In most road conditions you will en-
counter, you will not need to touch your
lever again: the gears will change au-
tomatically at the right time and at the
most suitable engine speed because
3
the automatic system takes into ac-
count the vehicle load and road contour
and adjusts itself to the particular driv-
4
ing style you have chosen.
Economical driving
When driving, always leave the lever
in position D, keeping the accelerator
pedal lightly depressed to ensure auto-
matic gear changes at a lower engine
speed.
Accelerating and overtaking
Depress the accelerator pedal firmly
and fully.
This will enable you to change down
to the optimum gear within the
engine range.