Renault Captur User Manual page 143

STOP AND START FUNCTION
Conditions of standby at high
speed
Depending on the vehicle, standby may
be activated in freewheel mode ➥ 1.58.
For vehicles equipped with auto-
matic gearboxes:
– the gearbox is in position D or M;
and
– the brake pedal is released;
and
– the acceleration pedal is released.

The warning light on the instru-
ment panel is lit when the engine is on
standby.
(2/4)
Preventing the engine from
standing by
In certain situations, such as negotiat-
ing a crossroads for instance, it is pos-
sible (with the system activated) to keep
the engine running so as to be ready to
move off quickly.
For vehicles equipped with auto-
matic gearboxes:
Keep the vehicle stationary without
pressing too hard on the brake pedal.
For vehicles equipped with manual
gearboxes:
Keep the clutch pedal pressed right
down.
To fill up with fuel, the engine
must be stopped (and not
only on standby in the case
of vehicles equipped with
the STOP and START function): you
must switch off the ignition ➥ 2.4
➥ 2.6. Fire hazard.
Conditions for coming out of
engine standby
For automatic gearboxes:
– when the driver's door is opened;
or
– when the driver's seat belt is unfas-
tened;
– the brake pedal is released, position
D, M or N engaged;
or
– position R is engaged;
or
– the accelerator pedal is depressed;
or
– in manual mode, the gear change
paddles are activated.
"AUTOHOLD" function activated
➥ 2.29, the brake pedal may be
released and the engine standby
maintained.
To exit engine standby, with the
brake pedal released, press the ac-
celerator pedal.
2.13