Introduction; Safety Symbols - Power smart HB2805A Instruction Manual

INTRODUCTION

Thank You for Purchasing a PowerSmart
safe operation and maintenance of this product. Every effort has been made to ensure the accuracy of
the information in this manual. PowerSmart
specifications at any time without prior notice.
Please keep this manual available to all users during the entire life of the snow Blower.
This manual contains special messages to bring attention to potential safety concerns,
snow blower damage as well as helpful operating and servicing information. Please read
all the information carefully to avoid injury and machine damage.
QUESTIONS? PROBLEMS?
Please contact our Customer Service Dept. with any questions and/or comments, either by email:
support@amerisuninc.com, or Toll Free at (800) 791-9458. We are available Mon-Fri 9am-5pm EST
to help solve any issues that you might encounter.

SAFETY SYMBOLS

The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols and
the explanations with them deserve your careful attention and understanding. The symbol warnings
do not, by themselves, eliminate any danger. The instructions and warnings they give are no
substitutes for proper accident prevention measures.
WARNING : Be sure to read and understand all safety instructions in this Operator's Manual,
including all safety alert symbols such as "DANGER," "WARNING," and "CAUTION" before
using this tool. Failure to follow all instructions listed below may result in electric shock, fire, and/or
serious personal injury.
SYMBOL MEANING
SAFETY ALERT SYMBOL: Indicates DANGER, WARNING, or CAUTION.
May be used in conjunction with other symbols or pictographs.
WARNING: The operation of any power tools can result in foreign objects being
thrown into your eyes, which can result in severe eye damage. Before beginning
power tool operation, always wear safety goggles or safety glasses with side shields and
a full-face shield when needed. We recommend a Wide Vision Safety Mask for use over eyeglasses or
standard safety glasses with side shields. Always use eye protection which is marked to comply with
ANSI Z87.1.
® Product. This manual provides information regarding the
® reserves the right to change this product and
4