Table of Contents
Advertisement
Notes for Test Institutes
Testing in accordance with EN 60704 must be carried out with the
appliance fully loaded and using the test cycle (see "Cycle Table").
Tests in accordance with EN 50242 must be carried out when the salt
dispenser in the water softener and the rinse aid dispenser have been
filled with salt and rinse aid respectively, and using the test cycle (see
"Cycle Table").
Amount of detergent required:
Rinse aid setting:
Measurement of noise
• The measurement is to be made immediately following a completed
short cycle.
Sample loading arrangements:
Upper basket *
* Upper basket in bottom (lowered) position
Cutlery basket
Full load:
11 place settings incl. serving dishes
27.5 g in the dispenser for detergent
6
Lower basket
1 Soup spoon
2 Knife
3 Fork
4 Dessert spoon
5 Teaspoon
6 Serving spoon
35
Advertisement
Table of Contents
