Atag VA5511AT User Information page 12

Activating/deactivating the inflow of rinse aid
If the 3 in1 button is pressed, you do not need to deactivate the inflow
of rinse aid.
1. Press the ON/OFF button.
3
If the only LED indicator illuminated belongs to a programme button,
this means that this dishwashing cycle has been activated. The dish-
washing cycle must be deselected:
Press function buttons 2 and 3 simultaneously for approx. 2 seconds.
Two lines are displayed in the multi-function display.
2. Press function buttons 2 and 3 simultaneously and keep them pressed.
The LED indicators for function buttons 1 to 3 will flash.
3. Press function button 2.
The LED indicator for function button 2 will flash.
The multi-display will indicate the current setting:
4. Pressing function button 2 activates and deactivates the rinse aid dis-
pensing function.
5. Once the multi-display is indicating the required setting, press the ON/
OFF button. The setting is now saved.
12
0d
Inflow of rinse aid is deactivated
1d
Inflow of rinse aid is activated (factory setting)