Table of Contents
Advertisement
When changing the needle entry point
1. If the stitches reach too far beyond the folded edge
2. If the stitches fail to reach the folded edge
48
DX7
Turn the zigzag width
adjusting dial to the
right side.
DX5
Push the zigzag width
adjusting button "+".
DX7
Turn the zigzag width
adjusting dial to the
left side.
DX5
Push the zigzag width
adjusting button "-".
Turn the handwheel
to check the needle
entry point. When
adjusting, make sure
the needle is in the
up position.
Turn the handwheel
to check the needle
entry point. When
adjusting, make sure
the needle is in the
up position.
Advertisement
Table of Contents
