Table of Contents
Advertisement
The type and application of the presser foot
Standard presser
foot
Zipper presser foot
Overcasting presser
foot
Blind stitch presser
foot
Buttonhole presser
foot
Manual buttonhole
presser foot
Walking foot
Patchwork presser
foot
Smooth presser
foot
DX7 Only
Open toe presser
foot
DX7 Only
Quilt presser foot
Edge Sewing
presser foot
DX7 Only
Marking of presser foot
↓
A
This is used mainly for straight stitch and zigzag stitches.
Use this presser foot especially when sewing heavy-weight
materials.
B
This is used to attach zippers.
C
This presser foot is used exclusively for overcasting to prevent
the cut edge of fabrics from fraying.
D
This presser foot is used for blind stitch on hems of trousers
and skirts, or sleeves.
E
This presser foot is used for automatic buttonholing.
I
This is used for sewing decorative stitches, letters and bartacks.
Also for manual buttonhole (pattern No. 03).
N
In general, this presser foot is used for difficult-to-feed" materi-
als such as knits, jersies, vinyl, artificial leather and leather or
quilting.
P
This presser foot is used for patchwork stitches. There are two
seam lines, 1/4-inch and 1/8-inch from center needle position.
T
This presser foot is used for non-slippery materials like vinyl
and satin stitches.
O
This is used for the applique and decorative stitches.
(Front part of the presser foot is open for better visibility.)
Q
This is used for the quilt stitch.
(Machine setting: Straight Stitch and Center needle position)
Refer to page 72 for more details.
R
This is used for patchwork, sewing center line of joined
materials by using the center guide of the presser foot.
* Fine tune the needle position by zigzag width adjustment dial.
17
Advertisement
Table of Contents
