Removing The 3G Module - Clevo N250GU Service Manual

Disassembly
Removing the 4G Module
Figure 8
4G Module Removal
4G Module Removal Procedure
1. Turn off the computer, turn it over to remove the battery
a. Locate the module.
2. The module will be visible at point
b. Disconnect the cables
and remove the screw.
3. Carefully disconnect the cables
c. The module will pop up.
4. The module
d. Lift the module up and
5. Lift the module
off the socket
a.
b.

3.M2 SATA-1 Module
• 1 Screw
2 - 14 Removing the 4G Module
1
&
2
will pop-up (Figure
5
up and off the computer
5
1
2
4
3
(page 2 - 5) and bottom cover
on the mainboard (Figure 8a).
, and then remove the screw
3
8c).
(Figure 8d).
c.
d.
(page 2 - 6).
from the module ( Figure 8b ) .
4
5
5