Removing The 3G Module - Clevo W150DAQ Service Manual

Disassembly

Removing the 3G Module

Figure 9
3G Module Removal
1. Turn off the computer, turn it over, and remove the battery
2. The 3G module will be visible at point
a. Locate the 3G module.
3. Carefully disconnect the cable
b. Disconnect the cable
4. The 3G module
and remove the screw.
c. The module will pop-up.
d. Remove the 3G module.
a.
Note: Make sure you
reconnect the antenna
cable to socket.
b.

4. 3G Module
• 1 Screw
2 - 14 Removing the 3G Module
on the mainboard
1
, and then remove the screw
2
(Figure 9c) will pop-up, and you can remove it from the computer
4
c.
1
3
2
(page 2 - 5) and the component bay cover
(Figure 9a).
(Figure 9b) .
3
(Figure
d.
4
(page 2 - 9).
9d).
4