Removing The 3G Module; Remove The Usim Card - Clevo W940AU Service Manual

Removing the 3G Module

1. Turn off the computer, turn it over to remove the battery
2. The 3G module will be visible at point
3. Carefully remove the screw
4. Carefully slide the 3G module
to remove it from the computer
5. Carefully remove the screw
6. The 3G interface adaptor card
a.
1
b. c.
2
(page 2 -
on the mainboard (Figure
1
(Figure 12b)
2
(Figure 12c) out of the 3G transfer card and lift it up (do not exceed 10degrees)
3
(Figure 12d).
(Figure 12e) .
5
will pop-up, and you can remove it from the computer
6
d.
3
3
4
5).
12a).
(Figure 12f).
e. f.
5
Disassembly
Figure 12
3G Module Removal
a. Locate the 3G.
b. Remove the screw.
c. Slide the module and lift
it up.
d. Remove the 3G module.
e. Remove the screw.
f. Remove the card.
6

3. mSATA Module
6. Interface Adaptor
• 1 Screw
Removing the 3G Module 2 - 17