Removing The 3G / M.2 Sata Module - Clevo P670RE Service Manual

Removing the 3G / M.2 SATA Module

3G Removal Procedure
1. Turn off the computer, remove the battery
2. Locate the module, it is visible at point
3. Carefully remove the screw
4. The module will pop-up
3
5. Lift the module up and off the computer
3
6. Reverse the process to install a new module.
a.
1
b.
2
(page 2 - 6).
( )
Figure 14a .
1
from the module ( Figure 14b ) .
2
( Figure 14c ) .
( )
Figure 14d .
c.
d.
3
3
Removing the 3G / M.2 SATA Module 2 - 19
Disassembly
Figure 14
3G Module Removal
a. Locate the module.
b. Remove the screw.
c. The module will pop-up.
d. Lift the module up off the
socket.

3. M2 SATA Module
• 1 Screw