Removing The 3G Module - Clevo W550AU Service Manual

Disassembly

Removing the 3G Module

Figure 13
3G Module Removal
1. Turn off the computer, turn it over, remove the battery
2. The 3G module will be visible at point
a. Locate the 3G module.
3. Carefully remove the screw
b. Remove the screw.
4. Carefully slide the 3G module
c. Slide the module in the
then lift it up (do not exceed 10degrees) to remove it from the computer
direction of the arrow
and lift it out. 5. Carefully remove the screw
d. Remove the 3G module.
6. The interface adaptor
e. Remove the screw.
f. Remove the interface
a.
adaptor.
b.

3. 3G Module
6.Interface Adaptor
• 2 Screws
2 - 18 Removing the 3G Module
1
(Figure 13b)
2
(in the direction of the arrow
3
(Figure 13e)
5
will pop-up, and you can remove it from the computer
6
1
a.
c.
3
4
2
(page 2 - 13) and the component bay cover
on the mainboard (Figure 13a).
.
- Figure
4
(Figure
.
d. e.
3
(page 2 -
13c) out of the interface adaptor and
13d).
(Figure 13f).
f.
6
5
11).