Appendix: I-Vu System Wiring Specifications And Recommended Vendors - Carrier SPS Installation Manual

Appendix: i-Vu System Wiring Specifications and Recommended Vendors

Wiring specifications
Wire type Description
MS/TP network 22 AWG, single twisted shielded
(RS-485) pair, low capacitance, CL2P, TC
foam FEP, plenum rated. See
MS/TP Installation Guide for
specifications.
MS/TP network 24 AWG, single twisted shielded
(RS-485) pair, low capacitance, CL2P, TC
foam FEP, plenum rated. See
MS/TP Installation Guide for
specifications.
Rnet 4 conductor, unshielded, CMP,
18 AWG, plenum rated.
Power - 2 conductor, CM, 18 AWG,
24 Vac unshielded.
Single twisted pair, unshielded,
Analog & discrete
sensor wiring CM, 22AWG, plenum rated.
< 100 ft
Analog & discrete Single twisted shielded pair, CM,
sensor wiring 22AWG, plenum rated.
100–500 ft
Carrier Sensors
Appendix: i-Vu System Wiring Specifications and Recommended Vendors
Recommended vendors & part numbers
Connect Air
International
(Available
thru ALPS) Belden
W221P-22227 --
W241P-2000F 82841
W184C-2099BLB 6302UE
W181P-2051 5300UE
W221P-2005 6500UE
W221P-2044 6500FE
Contractors
Ramcorp Wire & Cable
25160PV CLP0520LC
25120-OR --
21450 CLP0442
21251 CLP0440
21281 CLP0410
21280 CLP0520
53