Sensor Specifications; Wiring Specifications - Carrier SPS Installation Manual

Relative Humidity sensors
Sensor
Outdoor Relative
Humidity sensor
Part #33ZCSENORH-01
CAUTION Do not use a relative humidity sensor and CO

Sensor specifications

Operating temperature
Humidity
Sensor tolerance
Power
Output
Physical

Wiring specifications

Cable from sensor to controller:
Maximum length:
38
sensor on the same zone controller.
2
40° to 130°F (-4° to 54°C)
0 to 99%, non-condensing
Accuracy at 25°C:
18-36 Vdc
24 Vac half-wave rectified
#OPNSENSRH-01:
#33ZCSENSRH-01, #33ZCSENDRH-01,
and #33ZCSENORH-01:
Includes a 499 Ohm 1 Watt resistor for conversions of the 4–20 mA signal to
a +2–10 Vdc output signal
If <100 ft (30.5 meters)
If >100 ft (30.5 meters)
500 feet (152 meters)
Usage
Measures outdoor
humidity.
±2% RH from 10–80%
±3% RH from 80–99%
4-20 mA, 0-5 Vdc, and 0–10 Vdc
4-20 mA and 0–10 Vdc
22 AWG, unshielded
22 AWG, shielded
Carrier Sensors