Duct Air Temperature Sensor; Dat Sensor Specifications - Carrier SPS Installation Manual

Duct Air Temperature sensor

Duct Air Temperature sensor
Part #33ZCSENDAT
The Duct Air Temperature (DAT) sensor monitors supply air and is required for cooling and heating air source
applications on non-Carrier dampers and for stand-alone operation.

DAT sensor specifications

Operating range
Sensor tolerance
Physical
20
-40° to 245°F (-40° to 118°C) with a nominal resistance of 10,000 ohms at
77°F (25°C). See table below.
Accuracy of ±0.36°F (0.2°C) from 0° to 70°C
Small, epoxy sensor, 1.25 inch (3.2 cm) long. Includes a mounting grommet and
75-inch cable.
Carrier Sensors