Upgrading The Cpu - Viglen Vig535b Manual

Upgrading the CPU

CAUTION!
Allow time for the processor and heat sink to cool before touching either of them.
The Pentium® 4 processor together with Level 2 cache chips are housed in a
protective package.
The design of the Vig535b computer makes it a simple job to replace or upgrade the
processor. To do so please refer to figure 6 and follow the instructions below:
1. Read the warnings at the start of this chapter and ensure a static free environment
2. Remove the lid from the computer by removing the four screws at the rear of the
case
3. Locate the CPU module by referring to Figure 1 if necessary
4. Locate the heat sink clips, and remove heat sink (and unplug FAN cable)
5. Lift arm on Socket to release the CPU
6. Lift the CPU Vertically upwards until it is clear of the socket
You can now fit the replacement CPU and heat sink into the socket.
Figure 6: Installing the CPU heatsink (note heatsink type may vary from one shown above)
29
Vig535b Motherboard Manual