Table of Contents
Advertisement
Upgrading the CPU
CAUTION!
Before installing or removing a processor, make sure the AC power has been removed
by unplugging the power cord from the computer; the standby power LED should not be
lit. Failure to do so could damage the processor and the board.
To install a processor, follow these instructions:
1. Unlatch the processor socket lever by pushing it down and away from the socket.
(Figure 13, A, B)
2. Rotate the socket lever to lift the load plate away from the socket (Figure 14, A).
Make sure that the load plate is in the fully open position (Figure 13, B) while being
careful not to damage adjacent components. Do not touch the socket contacts.
V1.0
Figure 13: Unlatch the socket lever
Figure 14: Lift the load plate
Vig710W Motherboard Manual
24
Advertisement
Table of Contents
