Power Management Setup - Viglen Vig535b Manual

Power Management Setup

Figure 26: Power Management Setup
ACPI Suspend Type
This selects the type of suspend mode.
[S1(POS)] Enables the Power On Suspend function.
[S3(STR)] Enables the Suspend to RAM function.
MODEM Use IRQ
This specifies the IRQ that is used by the modem in order to be woken from an
incoming call.
Power Button Override
Under ACPI (Advanced Configuration and Power management Interface) you can
create a software power down. A software power down allows the system to resume
from Wake Up Alarms. This is controlled by the power button. If set to Instant-Off the
system powers off straight away. If set to Delay 4 sec. the power button has to be
held for 4 seconds before shutting down.
Restore On AC Power Loss
Selects the action the system takes after a AC power failure.
[Power Off] When the AC power returns the system remains off. You must press the
power button to turn the system on.
[Power On] When the AC power returns the system will be powered on
automatically.
[Last State] When the AC power returns the system will return to the state it was in. If
it was left on when the power goes then it will be turned on, if it was off it will remain
off.
58
Vig535b Motherboard Manual