Response Format - impinj RShell Reference Manual

Sub-menus:
image - Submenu of image status commands.
logging - Submenu of logging status commands.
network - Submenu of network status commands.
rfid - Submenu of RFID status commands.
snmp - Submenu of SNMP status commands.
system - Submenu of system status commands.
At all menus, entering the
description of the command and the syntax for its usage (if any). For example:
> ? show
show - Submenu of elements that may have their configuration or status shown.
Usage: show [<subcommand> ...]
or
> ? show system platform
platform - Display generic platform statistics.
Usage: show system platform
Entering the between a menu and sub-menu/command will return the usage for the items
?
following the at the lowest level. In the example below,
?
commands of its own, so entering
subcommands are necessary. If one of those subcommands is entered (
detailed usage is given.
> show ? image
image - Submenu of image status commands.
Usage: image [<subcommand> ...]
> show ? image metafile
metafile - Display information about the current image upgrade metafile.
Usage: image metafile

3.2 Response Format

The first line of every command's response has the following format.
Status='errorCode,errorString'
where errorCode is a numeric value and errorString is a human-readable error code. The error
codes are defined in Table 3-1
Revision 4.2, Copyright © 2009, Impinj, Inc.
command or prior to a command or menu, will return a short
help ?
brings up a usage help menu indicating that
show ? image
Proprietary and Confidential
RShell Reference Manual
is a menu that contains
image
show ? image metafile
), the
5