Config System Command; Config System Time Command - impinj RShell Reference Manual

Table 4-23 Config SNMP EPCG Device Command Parameters
Command Argument
role <role>
Example to configure the epcg device role to "my-reader-role":
> config snmp epcg device role my-reader-role
Status='0,Success'
4.2.7

Config System Command

The command allows configuration of the system identification parameters. The
config system
parameters are shown in Table 4-24.
Command
time Configure the system time.
4.2.8

Config System Time Command

This menu allows configuration of the system identification parameters. See Table 4-25 for a
description of the command parameters.
Command
Time MMDDhhmmCCYY
MM.DD-hh:mm:ss
CCYY.MM.DD-hh:mm:ss
CCYY.MM.DD-hh:mm
hh:mm:ss
hh:mm
Revision 4.2, Copyright © 2009, Impinj, Inc.
Format
string
Table 4-24 Config System Command Parameters
Table 4-25 Config System Command Parameters
Format
Configure the system time. Time must be entered in
one of the given formats.
Proprietary and Confidential
Description
The string that should be reported for device role
Description
Description
RShell Reference Manual
23