Show Rfid Llrp Commands - impinj RShell Reference Manual

Antenna<n>LockCount
Antenna<n>FailedLockCount
Antenna<n>KillCount
Antenna<n>FailedKillCount
Antenna<n>EraseCount
Antenna<n>FailedEraseCount
Gpi<n>TransitionCount

4.3.4.2 Show RFID LLRP Commands

The command provides statistics on the LLRP interface and has the subcommands
show rfid llrp
listed in Table 4-49.
Revision 4.2, Copyright © 2009, Impinj, Inc.
filters, but the write failed; <n> is 1–4
Integer Number of tags locked at Antenna <n> that matched
the configured filters; <n> is 1–4
Integer Number of tags where a lock was attempted at
Antenna <n> because the tag matched the configured
filters, but the lock failed; <n> is 1–4
Integer Number of tags killed at Antenna <n> that matched the
configured filters; <n> is 1–4
Integer Number of tags where a kill was attempted at Antenna
<n> because the tag matched the configured filters,
but the kill failed; <n> is 1–4
Integer Number of tags erased at Antenna <n> that matched
the configured filters; <n> is 1–4
Integer Number of tags where a erase was attempted at
Antenna <n> because the tag matched the configured
filters, but the erase failed; <n> is 1–4
Integer Number of times a GPI event matched the
configuration; <n> is 1–4
Proprietary and Confidential
RShell Reference Manual
41