Config Snmp Write Command; Config Snmp Epcg Command; Config Snmp Epcg Device Command - impinj RShell Reference Manual

RShell Reference Manual
Table 4-21 Config SNMP Access Command Parameters
Command Argument
rocommunity <read-only string>
rwcommunity <read-write string>
Example to set the rocommunity string to "my-read-only-password":
> config snmp access rocommunity my-read-only-password
Status='0,Success'

4.2.6.3 Config SNMP Write Command

The
config snmp write
(enabled) or not (disabled). The config snmp write command parameters are shown in Table
4-22Table 4-21.
Table 4-22 Config SNMP Write Command Parameters
Command Argument
enable all
disable all
Example to enable SNMP writes:
> config snmp write enable all
Status='0,Success'

4.2.6.4 Config SNMP EPCG Command

The
config snmp epcg
subcommands and only one submenu, device, for this command.

4.2.6.4.1 Config SNMP EPCG Device Command

The
config snmp epcg device
device role is the only settings that can be configured. The config snmp epcg device command
parameters are shown in Table 4-23.
22
.
Format
string
string
command allows the user to configure whether SNMP writes are allowed
Format
string
string
menu provides control of the EPCglobal RM MIB. There are no direct
command is used to configure epcg device settings. Currently, the
Proprietary and Confidential
Description
Sets the read-only community string for read access to
SNMP attributes.
Sets the read-write community string for read-write
access to SNMP attributes. If SNMP writes are
disabled this string may still be used to read via SNMP.
Description
Enable SNMP writes on all writeable objects.
Disable SNMP writes on all writeable objects.
Revision 4.2, Copyright © 2009, Impinj, Inc.