Config Network Hostname Command; Config Network Lla Command; Config Network Mdns Command - impinj RShell Reference Manual

RShell Reference Manual
Command
dhcp
dns
ip
ntp
hostname
lla
mdns

4.2.4.1 Config Network Hostname Command

Table 4-7 shows the
config network hostname
Table 4-7 Config Network Hostname Command Parameters
Command Argument
hostname <host name>
Example to change the hostname:
> config network hostname MySpeedwayRevolution
Status='0,Success'

4.2.4.2 Config Network LLA Command

Table 4-8 shows the
config network lla
Table 4-8 Config Network LLA Command Parameters
Command Argument
lla (enable | disable)
Example to change the state of the LLA service:
> config network lla enable
Status='0,Success'

4.2.4.3 Config Network mDNS Command

Table 4-9 shows the
config network mdns
14
.
Table 4-6 Config Network Command Parameters
Sub-menu of DHCP-specific configuration commands.
Sub-menu of DNS-specific configuration commands.
Sub-menu of IP address and configuration commands.
Sub-menu of NTP-specific configuration commands.
Set the reader's network hostname.
Configures the LLA service to either be enabled or disabled.
Configures the mDNS service to either be enabled or disabled.
Format
string Set the reader hostname. If using DHCP and a hostname is
returned from the DHCP server, the hostname returned
from DHCP will take precedent.
parameters.
Format
enum Configure the current state of the LLA service. LLA, when
enabled, is only used if the network IP is set to dynamic
and DHCP is unable to obtain an IP address.
parameters.
Proprietary and Confidential
Description
parameters.
Description
Description
Revision 4.2, Copyright © 2009, Impinj, Inc.