Show Snmp Command - impinj RShell Reference Manual

RShell Reference Manual
Table 4-49 Show RFID LLRP Command Parameters
Command Argument
accessspec id
capabilities
config
inbound
outbound
region
rospec id
stat
summary
4.3.5

Show SNMP Command

The menu displays information about the SNMP configuration. Table 4-50 provides a
show snmp
list of the available show snmp subcommands. The response parameters for
are shown in Table 4-51, and for
summary
response parameters for
parameters.
Command
all
summary
epcg
42
.
Format
integer Display the XML text of a specified AccessSpec.
Display the XML text of the LLRP capabilities advertised
by this reader.
Display the XML text of the LLRP configuration.
Display information about LLRP client-initiated
connections.
Display information about LLRP reader-initiated
connections.
Display the LLRP region and Impinj sub-region at which
the reader is currently operating. Also will display sub-
regulatory region information when configured by LLRP
extensions
integer Display the XML text of a specified ROSpec.
Report LLRP statistics
Display a summary of the LLRP configuration and status.
show snmp epcg
is a concatenation of the summary and epcg response
show snmp all
Table 4-50 Show SNMP Command Parameters
Displays all of the the SNNP settings
Displays summary of generic SNMP settings.
Displays EPCG RM MIB specific settings
Proprietary and Confidential
Description
are shown in Table 4-52. The
Description
Revision 4.2, Copyright © 2009, Impinj, Inc.
show snmp