Show Network Command - impinj RShell Reference Manual

RShell Reference Manual
Command Arguments
events (err | app) <event count>
summary
Table 4-33 Show Logging Events Response Parameters
Argument
Event1
Event2
...
Event<n>
Table 4-34 Show Logging Summary Response Parameters
Argument
Managementlevel
RFIDLevel
SystemLevel
Samples of the commands are shown below:
> show logging summary
Status='0,Success'
ManagementLevel='Error'
SystemLevel='Error'
RFIDLevel='Error'
> show logging events app 3
Status='0,Success'
Event1='Mar 24 22:17:26 (none) WDC: Reboot 3: Reason: Processor / Reboot
Time: Tue Mar 24 18:01:26 2009 '
Event2='Mar 24 22:17:39 (none) linkmonitor: set date with /usr/sbin/ntpd -g -
q failed'
Event3='Mar 24 22:17:39 (none) ntpd[320]: unable to bind to wildcard socket
address 0.0.0.0 - another process may be running - EXITING'
4.3.3

Show Network Command

The menu contains commands to display networking parameters and statistics. All
show network
commands are single word commands and take no arguments. Commands are shown in Table
4-35, while the response parameters are shown in Table 4-36 through Table 4-46.
32
.
Table 4-32 Show Logging Command Parameters
Format
enum,
integer
Format
string The string responses from the log events
string
... ...
string
Format
( Emergency |
Alert | Critical |
Error |
Warning |
Notice | Info |
Debug )
Proprietary and Confidential
Description
Uses the event count number to determine how
many of the last internal log entries to display.
Displays the current user logging configuration.
See Table 4-34.
Description
Description
Log severity level for Management
Log severity level for RFID
Log severity level for System
Revision 4.2, Copyright © 2009, Impinj, Inc.