Show Command; Show Image Command - impinj RShell Reference Manual

4.3 Show Command

The command has several submenus, as shown in Table 4-26, and described in the
show
following sections.
Command
image
logging
network
rfid
snmp
system
4.3.1

Show Image Command

The command has parameters as shown in Table 4-27.
show image
Command
metafile
summary
Following an upgrade command,
For each abnormal status, a reason parameter is given to indicate the reason for the status. The
reason values are also given in Table 4-28
Revision 4.2, Copyright © 2009, Impinj, Inc.
Table 4-26 Show Command Parameters
Sub-menu of image status commands.
Sub-menu of logging status commands.
Sub-menu of network status commands.
Sub-menu of RFID status commands.
Sub-menu of SNMP status commands.
Sub-menu of system status commands.
Table 4-27 Show Image Command Parameters
Displays information about the current upgrade metafile.
If no metafile has ever been successfully downloaded,
only a subset of the available fields are shown.
Displays the reader's image information, see Table 4-29
and Table 4-30.
UpgradeStatus
Proprietary and Confidential
RShell Reference Manual
Description
Description
can take any of the values shown in Table 4-28.
25