Table of Contents
Advertisement
PRODUCT SPECIFICATIONS
Operating Voltage:
Panel Capacity:
Fuse Capacity:
Note 1: Ensure that the load total connected to the fused outputs does not exceed the panel capacity rating.
Note 2: Most fuses should be continuously operated at no more than 80% of their nominal current rating.
Consult the fuse manufacturers specifications.
Power Consumption:
Voltage Drop (without fuse): 60mV (Typical)
Alarm Form "C" Contact:
Alarm Sensor Inputs:
Ethernet:
SNMP:
Input Connector:
Output Connector:
Alarm Connectors:
Operating Temperature:
Dimensions:
Weight:
Warranty:
10 to 32VDC
150A (Continuous)
180A (Peak)
25A Maximum ATO/ATC Blade x 9
40A Maximum JCASE x 3
2.5 watts
Form "C" Dry Contacts
1A/60VDC Max
External dry contact alarm inputs, configurable for NO or NC logic.
Applied voltage 3.3V, 0.4mA for contact closure detection.
RJ45, 10Base-T/100Base-T
SMNPv1/v2c/v3
Heavy Duty Insulated M10 Stud
75in-lbs Max
Barrier Terminal Block
M4 Screws
8 – 20AWG Wire Range
12in-lbs Max
Euro Terminal Block
M2 Screws
16 – 28AWG Wire Range
1in-lbs Max
-4°F to 140°F
-20°C to +60°C
19.0" x 9.29" x 1.75"
483mm x 236mm x 45mm
8.0lbs (3.6kg)
2 years
25
Advertisement
Table of Contents
