Device Setup - ICT DISTRIBUTION 2 Series Instruction Manual

DEVICE SETUP

This page allows you to configure the device settings of the panel. To save any changes to the device
settings, click on Save Settings at the bottom of this page.
DEVICE INFO
Site Name: Allows you to assign a custom name to the panel.
Model: Displays the model number of the panel.
Hardware: Displays the hardware version of the panel.
DATE AND TIME SETTINGS
Current System Time: Displays the current date and time of the panel's onboard clock. This clock is
used to timestamp the log entries in the data log. The clock can either be set manually, or it can be
synchronized with a remote NTP Time Server over Ethernet.
Synchronizing the clock with a NTP Server is recommended to ensure that the date and time will still be
correct after a power failure.
Synchronize with NTP Server: Checking this box will enable date and time synchronization with a NTP
Server. A valid server address must also be entered in the NTP Server field.
NTP Server: The name or IP address of the NTP Server used for date and time synchronization
(such as pool.ntp.org ).
Time Zone: Select a time zone to convert the time received from the NTP Server to your local time.
Set Time Manually: Checking this box will allow you to manually set the panel's date and time. The
date must be entered in MM/DD/YY format, and the time must be entered in HH:MM:SS format.
DATA LOGGING
Data Logging: Allows you to enable data logging. With data logging enabled, the panel will record the
system voltage, system current, output currents, fuse status, and alarm input status at a sample rate of
1 sample per minute. To view the log while data logging is enabled, click on the Download Log button
next to the data logging dialog box. This will download the log in Comma Separated Values (CSV)
format, which can be opened by most spreadsheet software applications such as Microsoft Excel. The
log will hold up to 30 days of data, with oldest log entries at the top of the log file.
11