Maintenance - ICT DISTRIBUTION 2 Series Instruction Manual

MAINTENANCE

This page allows you to reset the panel, restore the panel to factory default settings, and send test
e-mail to verify that functionality.
RESET COMMUNICATIONS
Pressing the Reset button will reset the Ethernet communications port on the panel without interrupting
DC power to the output terminals. Current settings are maintained during the reset.
RESTORE FACTORY DEFAULT SETTINGS
Pressing the Restore button will restore ALL settings to the original factory default values, including the
passwords. If you only want to restore the network settings and passwords, see the Password Reset
section.
SEND TEST E-MAIL
Pressing the Send Test E-mail button will send test e-mail to the specified recipient using the e-mail
settings on the Network Setup page.
PING DIAGNOSTICS TOOL
This tool can be used to verify connectivity to any network device. To use the tool, Enter the hostname or
IP address of the target device, then click Ping.
19