Miller PipePro Series Owner's Manual page 20

Do not work on unit if engine is running. Stop engine first.
Do not smoke while fueling or if near fuel.
Stop engine before fueling.
Do not fuel a hot engine.
Use lift eye to lift unit and properly installed accessories only, not gas cylinders. Do not exceed maximum lift eye
rating (see Specifications).
Do not use ether or other starting fluids. Using starting fluids voids warranty. See engine Owner's Manual.
Hot muffler and exhaust pipe can cause severe burns.
Welding, cutting, drilling, or grinding on base can cause fire or explosion.
Do not discard product (where applicable) with general waste.
Reuse or recycle Waste Electrical and Electronic Equipment (WEEE) by disposing at a designated collection
facility.
Contact your local recycling office or your local distributor for further information.
Kasjf;laksf;lkasdf'l;aksdf;lkasd;flksadflkasd;lk
Kasjf;laksf;lkasdf'l;aksdf;lkasd;flksadflkasd;lk
Kasjf;laksf;lkasdf'l;aksdf;lkasd;flksadflkasd;lk
OM-262506 Page 16
.
Complete Parts List is available at www.MillerWelds.com
Wear hat and safety glasses. Use ear protection and button shirt
collar. Use welding helmet with correct shade of filter. Wear complete
body protection.
Become trained and read the instructions before working on the
machine or welding.
Safe21 2012−05
Safe22 2012−05
Safe23 2012−05
Safe24 2012−05
Safe25 2012−05
Safe89 2015−02
Safe90 2012−07
Safe91 2012−07
Safe37 2012−05
Safe38 2012−05
Safe40 2012−05