Before Installation - Toshiba e-STUDIO 203S Operator's Manual

BEFORE INSTALLATION

Hardware and software requirements
Check the following hardware and software requirements in order to install the
software.
Computer type
3
Operating system*
Display
Hard disk free space 150 MB or more
Other hardware
requirements
1
* The machine's USB connector will transfer data at the speed specified by the USB 2.0
(Hi-Speed) only if the Microsoft USB 2.0 driver is installed in the computer.
2
* Compatible with Windows 98, Windows Me, Windows 2000 Professional, Windows XP
or Windows Vista preinstalled model standardly equipped with a USB port.
3
* Printing is not available in MS-DOS mode.
4
* The machine does not support printing from a Macintosh environment.
5
* Administrator's rights are required to install the software using the installer.
IBM PC/AT or compatible computer equipped with a
1 2
USB2.0* /1.1*
4
Windows 98, Windows Me, Windows 2000 Professional*
*
5
Windows XP* , Windows Vista*
1024 x 768 dots resolution and 16-bit color or higher is
recommended.
An environment on which any of the operating systems
listed above can fully operate
Get other manuals https://www.bkmanuals.com
5
5
,
5
37