Selecting The Tray - Toshiba e-STUDIO 203S Operator's Manual

Paper output tray extension
When copying onto paper larger than 8-1/2" x 11" size, pull out the paper output tray
extension.
Paper holder arm
The paper output tray has a paper holder arm. The paper holder arm presses gently
on the output paper to stack it (p.9).
After removing paper, if you need to return the paper to the paper
Note
output tray, lift up the paper holder arm and place the paper under
the arm.
Setting the number of copies
Press the numeric keys to set the number of copies.
The set number of copies appears in the display. A maximum of 99 copies can be set.
If you wish to make only a single copy, copying is possible with the display
showing "0".
If you enter the wrong number, press the [CLEAR] key (
Note
enter the correct number.

SELECTING THE TRAY

Press the [TRAY SELECT] key (
Each time, you press the [TRAY SELECT] key (
the location indicated by the tray location indicator
changes in the following order : paper tray→lower
paper tray (when the 250-sheet paper feed unit is
installed.)→bypass tray.
The tray location indicator will blink when there is no paper in the paper
Note
tray during operations, or when the tray is not closed or is improperly
closed.
OPY.
x11 55
).
Get other manuals https://www.bkmanuals.com
MAKING COPIES
),
3
) and
READY TO COPY.
100% EXTRA
23