Download Print this page

Insignia KY004 Series Installation Manual page 4

Infrared sauna

Advertisement

Electrical Requirements Model KS004
Always consult a qualified Electrician before connection as to suitability
Always Obtain Relevant Certification (minor Works Part P etc)
This Sauna must comply with current UK bathroom regulations
Your electrical contractor will understand ALL legal requirements of connection before undertaking any work or
UNDER NO CIRCUMSTANCES UNDERTAKE THIS YOURSELF
2) (Preferred) Wire into isolated fused feed connecting directly to the house consumer/service box.
Always use protection against electrical surge. Your shower should be treated the same as a home computer. A
surge protector should eradicate the possibility of burn out.
Subject to connection type, electrical work needs to be signed off by a fully qualified operative by law. Failure to
adhere to this will not only void your electrical warranty for your sauna, but could void your house insurance.
Voltage Rating
220-240AC
Frequency Rating
Power Rating
1715 Watts Sauna
Total Amperage 19.24 amps
installation.
Note for electrician:
1) Connect within current laws and IP directives.
www.insigniashowers.com
50Hz
Last Modified: 03/10/2023
Tools Required
Scissors
Knife
Spirit Level
Tape Measure
Philips Screwdriver
Electric Drill
Safety Gloves
Safety Glasses
04

Advertisement

loading