Table of Contents
Advertisement
CARE AND MAINTENANCE
To enjoy years of outstanding performance from your heater, make sure you
perform the following maintenance activities on a regular basis:
agents.
While cleaning your unit, be sure to keep the area around the burner and
control compartment dry at all times. Do not submerge the control valve
assembly. If the gas control is submerged in water, do NOT use it. It must be
replaced.
passageways clean. Signs of possible blockage include:
condition can damage heater and render it unsafe for use. Clean burner
holes by using a heavy-duty pipe cleaner. Compressed air may help clear
away smaller particles.
screen with warm soapy water if any carbon deposits develop.
Note: In a salt-air environment (such as near an ocean), corrosion
occurs more quickly than normal. Frequently check for corroded areas
and repair them promptly.
Use high-quality automobile wax to help maintain the appearance of
your heater. Apply to exterior surfaces
DO NOT apply to mitter creen
cleaning
air
.
or
.
FOR YOUR SAFETY
Do NOT touch or move heater for at
least 45 minutes after use.
:
sheltered from direct
contact with inclement
weather (such as rain, sleet,
hail, snow, dust and
debris).
protect exterior surfaces
and to help prevent build-
up in air passages. Never
leave LPG tank exposed to
direct sunlight or excessive
heat.
Wait until heater is
cool before covering.
should repair gas passages and
associated components.
Caution: Always allow heater to
cool before attempting service.
Advertisement
Table of Contents
