Toshiba RAS-B07G3KVSG-E Service Manual page 58

POWER-SELECTION OPERATION
This function is used when the circuit breaker is shared with other electrical
appliances. It limits the maximum current and power consumption to 100%,
75%, or 50% and can be implemented by POWER-SELECTION. The lower
percentage, the higher saving and also longer compressor lifetime.
Note:
• Due to the reason that POWER-SELECTION function limits the maximum
current, inadequate cooling or heating capacity may occur.
1. Press MENU button for enter menu setting and press TEMP.
button to select POWER-SEL
2. Enter POWER-SEL setting by press MENU button again.
3. Select POWER-SEL level by press TEMP. button.
100% 75%
4. Confi rm POWER-SEL level by press MENU button.
5. Leave from menu setting display by select EXIT.
Blink only triangle
50%
- 58 -
6. MANUAL DEFORST OPERATION
To defrosting the heat exchanger of the outdoor unit during Heating operation
Press and hold : for 5 seconds , then remote control display will
MENU
show as picture 1 for 2 seconds.
7. AIR FLOW DIRECTION
Press : Move the
1
louver in the desired vertical
direction.
Press : Move the
2
louver in the desired horizontal
direction.
SWING operation can be selected
from MENU button
Vertical
Swing off
(Up-Down)
Swing
Horizontal
3
(Left-Right)
Swing
Vertical and
Horizontal
Swing
HADA CARE
FLOW
Note:
● Do not move the louver manually by hands or others.
● The louver may automation positioning by some operation mode.
1
● Vertical (Up-Down) swing
● Horizontal (Left-Right) swing
● HADA Care fl ow