What's Next - Cisco Firepower 1010 Getting Started Manual

Firepower Threat Defense Deployment with FMC
firepower # connect local-mgmt
Step 2 Issue the shutdown command:
firepower(local-mgmt) # shutdown
Example:
firepower(local-mgmt)# shutdown
This command will shutdown the system.
Please enter 'YES' or 'NO': yes
INIT: Stopping Cisco Threat Defense......ok
Step 3
Monitor the system prompts as the firewall shuts down.
Step 4 Observe the Power LED and Status LED to verify that the chassis is powered off (appear unlit).
Step 5
After the chassis has successfully powered off, you can then unplug the power to physically remove power
from the chassis if necessary.

What's Next?

To continue configuring your FTD, see the documents available for your software version at
Cisco Firepower
For information related to using FMC, see the
All manuals and user guides at all-guides.com
Documentation.
Continue?
Firepower Management Center Configuration
Cisco Firepower 1010 Getting Started Guide
What's Next?
Navigating the
Guide.
121