Cisco Firepower 1010 Getting Started Manual page 45

Firepower Threat Defense Deployment with CDO
Before you begin
• You can use this method to onboard your device to the US, EU, or APJ regions.
• Your device MUST be managed by Firepower Device Manager (FDM). Make sure that there are no
pending changes waiting on the device.
• Your device can use either a 90-day evaluation license or it can be smart-licensed. You will not need to
unregister licenses installed on the device from the Cisco Smart Software Manager.
• Make sure DNS is configured properly on your FTD device.
• Make sure the time services are configured properly on the FTD device. Make sure the FTD device shows
the correct date and time, otherwise the onboarding will fail.
Procedure
Step 1 In the CDO navigation pane, click Devices & Services, then click the blue plus button (
device.
Step 2 Click the FTD card.
Step 3
Click Use Registration Key.
Step 4 Complete the Device Name area fields.
Figure 16: Device Name
a) Choose the Secure Device Connector that this device will communicate with. The default SDC is displayed
but you can change it by clicking the SDC name.
b) Enter the device name in the Device Name field. This could be the hostname of the device or any other
name you choose.
c) Click Next.
Step 5 In the Database Updates area, check or uncheck the Immediately perform security updates, and enable
recurring updates, and click Next.
All manuals and user guides at all-guides.com
Onboard an FTD with a Registration Key (Version 6.6+)
Cisco Firepower 1010 Getting Started Guide
) to Onboard a
43